Part one of our look at print providers that have carved out a niche in the package market.
By Jake Widman
With that market in mind, Digital Impact was launched with an HP Scitex FB6700 (then badged as the Scitex CorJet). “With the CorJet,” says Mormile, “instead of manufacturing all the tooling, die cut, and plates a traditional press would need, we could print direct to corrugated, die-cut it—we also have two DCM die cutters—and deliver the product printed, cut, and out the door on skids. Then if the product succeeds, we can manufacture the printing plates and go to the larger run.”
All of Digital Impact’s final product comes off the FB6700. They send the printer a combination of Adobe Illustrator and Photoshop files, flattened and color managed and saved as EPS files. “That’s something a lot of companies aren’t doing,” says Mormile, “but we’ve mastered how to build these files.”
“By far, the bulk of what we print,” Mormile continues, “is on corrugated cardboard—probably 80 percent.” The company also uses the FB6700 for signage, which it typically prints on Coroplast or SBS board.
What makes a run short enough to be appropriate for the FB6700? Mormile says it really depends on the yield of the sheet and to what other kind of press you’re comparing it. “We run a 63 x 112-inch sheet through our machine,” he explains. “If we need 1000 pieces and can run two-up per sheet, it makes sense to run them on 500 sheets. If we’re doing risers for countertop displays, on the other hand, we can compete on runs up to 2000. In that case, we’re competing against a litho press, and the setup charges are too costly for them to manufacture those low quantities.”
The company particularly prides itself on being able to turn a job around under a tight deadline. One such project was a group of packages and display units produced for Twist-Lok Drill & Drive Systems. The customer found Digital Impact via an Internet search and called on a Saturday. He brought the products in the next Monday—three consisted of plain, red, plastic cases with parts inside, and one came in a clear, plastic “blister” that had no backing yet. Twist-Lok needed packaging and displays for a trade show coming up within the next couple of weeks.
“We developed all the graphics,” recalls Mormile. The shop printed the wraparounds for the red cases on E-flute corrugated material and then the displays on B-flute material. From the FB6700, they went to the laminator, then to the cutting table. “We probably did 250 or 500 trays with six items in each,” says Mormile, “plus a floor-standing display with three different items. By Thursday of that same week, we had the complete job done and ready to go.”